Are your Structural Drying services available in Lehi?

Yes, COS Water Damage Restoration provides round-the-clock Structural Drying services directly in Lehi, UT.

How much does emergency service cost in Lehi?

We offer upfront, transparent pricing with no hidden fees for all service calls in Lehi.

Structural Drying in Lehi, UT | 24/7 Local Service

Name: COS Water Damage Restoration
Telephone: +1-844-499-0972
Price range: $$

Why Choose Us

What Separates Professional Structural Drying in Lehi from Surface Drying

Structural Drying is a science-driven process built on thermodynamics, psychrometrics, and equipment calibration — not fans pointed at a wet floor and checked weekly. Here's what our Lehi team brings to every structural drying project that ensures complete, documented results.

🌊

LGR Dehumidification

Low-grain refrigerant (LGR) dehumidifiers operate more efficiently in the low-humidity conditions created by an active drying program than conventional dehumidifiers — achieving lower dewpoint conditions that accelerate evaporation from structural materials. Our Lehi structural drying crews deploy properly sized LGR equipment based on the specific volume and material profile of your affected assemblies. Equipment sizing is calculated, not estimated.

📈

Daily Psychrometric Records

Documented daily readings are what separate a professional drying program from a rental dehumidifier in the corner.

🏠

Wall Cavity Drying

Wall cavity drying is where most post-loss mold in Lehi properties originates. It's where we focus.

📋

Insurance-Formatted Reports

COS Water Damage Restoration's Lehi drying technicians generate moisture logs formatted specifically for insurance claim submission — daily readings at sensor point locations mapped to a floor plan, equipment placement and settings recorded, and final confirmation readings that document the completion of the drying program. Xactimate-compatible line items for each day's equipment and labor make the drying scope transparent to your adjuster and minimize the chance of a supplement dispute on the drying phase of your claim.

Services

Our Lehi Structural Drying Scope

Here are the specific drying scenarios and assembly types our Lehi team is equipped and trained to handle.

🏠

Wall Framing & Drywall Cavity Drying

The most common drying failure in Lehi water damage projects is a wall framing cavity left with elevated moisture content after surface materials are dry. Our Lehi team uses calibrated cavity access — typically 1-inch drill holes at the base of the wall framing cavity — to introduce directed airflow from high-velocity air movers into the stud bay, paired with LGR dehumidification to extract the evaporated moisture. Moisture readings at framing sensor points confirm completion. Access ports are patched and filled after the program completes, typically leaving no visible trace of the access procedure.

🧱

Subfloor & Hardwood Assembly Drying

Subfloor assemblies — OSB or plywood sheathing over floor joists — and hardwood flooring systems require targeted drying approaches because of their density and their tendency to cup, buckle, or swell when dried too aggressively or left wet too long. Our Lehi drying crew evaluates hardwood flooring species and moisture content before recommending drying-in-place versus removal, and when drying in place is appropriate, we use floor drying mats that direct conditioned air against the top face of the hardwood under controlled pressure — accelerating evaporation while minimizing the differential drying stress that causes cupping.

🔮

Crawlspace & Below-Grade Drying

Crawlspace saturation after a water event in Lehi often goes undetected — we include it in every below-grade moisture mapping session.

💨

Ceiling & Overhead Assembly Drying

Water that migrates down from an upper floor or a roof intrusion in a Lehi property saturates ceiling drywall and the framing above it — areas that are impossible to reach with standard floor-level equipment. Our Lehi team installs ceiling injection ports and directs positive-pressure airflow through ceiling cavities, combined with LGR dehumidification of the affected room air space. Ceiling drywall that cannot be dried to target moisture content is removed — rather than left to become a mold substrate — and documented in the scope for replacement.

🏛

Commercial & Multi-Room Drying Programs

Large water events in Lehi commercial or multi-family properties may affect dozens of rooms across multiple floors — requiring coordinated equipment staging, airflow balancing between spaces, and readings management across a large number of sensor points simultaneously. Our Lehi commercial drying team uses scaled equipment deployment and a project management approach that tracks readings and equipment across the full property footprint, adjusting equipment placement and settings daily based on the reading data from each zone.

🔏

Mold Prevention Monitoring

Mold prevention is not a separate service — it's built into every Lehi structural drying program we run.

Professional Structural Drying technician working in Lehi, UT

24/7 Emergency Structural Drying experts in Lehi, UT

Our Process

How Structural Drying Works in Lehi

Moisture Mapping

Before one piece of drying equipment is placed, our Lehi team completes a full moisture mapping session using FLIR thermal imaging and calibrated pin-type and non-penetrating meters. The map documents all affected assemblies, saturation levels, and the extent of moisture migration through the structure. Equipment placement and sizing are calculated from this map.

Engineered Equipment Staging

Equipment placement is engineered based on the moisture map and assembly data — not placed by habit.

Daily Psychrometric Monitoring

Daily readings, daily reporting, daily equipment adjustment if needed — documented throughout.

Confirmed Completion

Completion is confirmed by instruments and documented in writing. No visual estimates.

Reviews

Lehi Customers on Our Structural Drying Service

★★★★★

"The most important thing about COS Water Damage Restoration's Lehi structural drying was that they explained the readings to me every single day. I understood what the numbers meant, what the target was, and how far we were from completion. By day six I was watching the moisture content readings in our wall framing drop from 28% to 11% and understood exactly what was happening and why. That level of transparency is what you need when your home is full of drying equipment for a week."

K. Yamamoto

Verified Lehi, UT Customer

★★★★★

"Our insurance adjuster was skeptical about the drying scope initially, but COS Water Damage Restoration's documentation — the daily moisture logs, the floor plan with sensor point locations, the before and after readings — was thorough enough that the adjuster approved the full scope without any back-and-forth. That documentation is worth its weight in the claim settlement alone."

O. Delacroix

Verified Lehi, UT Customer

★★★★★

"We had a particularly complex drying project across three floors of a Lehi office building after an upstairs pipe event. COS Water Damage Restoration managed the zone readings, adjusted equipment as the drying progressed on different floors at different rates, and wrapped the entire building within 11 days with full documentation. That's professional-grade project management."

H. Bergstrom

Verified Lehi, UT Customer

FAQs

Common Questions — Structural Drying in Lehi

How long does Structural Drying take in Lehi?

Structural drying timelines in Lehi vary based on material type, saturation level, ambient conditions, and the assembly configuration of the affected area. A well-managed drying program using properly sized LGR equipment and daily monitoring typically runs 3-7 days for standard wall and floor assemblies, 5-10 days for wall cavity and subfloor assemblies with significant saturation, and longer for dense structural assemblies such as hardwood over concrete or multi-layer floor systems. Your Lehi project manager provides a realistic range at the initial moisture mapping session and updates it daily based on the actual readings.

What is the target moisture content for structural drying in Lehi?

Equilibrium moisture content (EMC) targets depend on the material being dried and the ambient conditions in Lehi. For softwood framing (the most common structural material), industry standard targets are typically 6-12% moisture content. For hardwood flooring, targets adjust based on species and acclimation moisture content for the ambient conditions in your property. Drywall targets are measured separately by core readings. Your Lehi drying crew documents the target range for each material in the project file and confirms completion when all readings fall within range.

Can drywall be dried in place during Structural Drying in Lehi?

Standard gypsum drywall can sometimes be dried in place if: the water source was clean (Category 1), the saturation period was short (less than 24-48 hours), the drywall face paper is intact and not delaminating, and cavity moisture readings from the wall behind indicate manageable saturation levels. When these conditions are not met — particularly with Category 2/3 events or extended saturation — removing the drywall and drying the framing directly is both more effective and safer from a mold risk standpoint. Our Lehi team evaluates each wall section individually and documents the decision in the written scope.

What are psychrometric readings and why do they matter for Lehi drying?

Psychrometrics is the study of air moisture relationships. In a drying program, psychrometric readings measure the temperature and relative humidity of the air in each drying zone, from which we calculate the specific humidity (grains of water per pound of dry air) and the dewpoint temperature. These calculations tell us how much moisture the air is holding relative to its capacity, and how efficiently the LGR dehumidification equipment is removing moisture from the air space. Combined with direct moisture content readings in structural materials at fixed sensor points, psychrometric data gives us a complete picture of the drying system's performance — and tells us when the drying program is genuinely complete, not just visually complete.

Will COS Water Damage Restoration provide drying documentation for my insurance claim in Lehi?

Yes — daily psychrometric logs, moisture content readings at sensor point locations mapped to a floor plan, equipment placement and settings records, and a written drying completion report are all generated by our Lehi team and provided for your insurance claim file. Our drying documentation is formatted to match what insurance carriers request for the drying phase of water damage claims, which reduces the likelihood of a documentation-based supplement dispute.

Can I stay in my Lehi home while structural drying equipment is running?

Yes — in most cases, you can remain in your Lehi home while structural drying equipment runs. The equipment creates noise and slightly elevated temperatures in the affected areas, and the ambient humidity in the drying zones drops significantly during the program. Our Lehi team will walk you through what to expect during the active drying program: which areas will have equipment, what the noise and temperature conditions will be like, and what household activities (opening windows to outside humidity, running a home humidifier) should be avoided during the drying cycle.

Service Area

Structural Drying Coverage — Lehi and UT

COS Water Damage Restoration's Lehi structural drying team serves Lehi and surrounding communities throughout UT. Daily monitoring included. Call +1-844-499-0972 to get started.

Lehi (/ˈliːhaɪ/ LEE-hy) is a city in Utah County, Utah, United States. It is named after Lehi, a prophet in the Book of Mormon. The population was 75,907 at the 2020 census, up from 47,407 in 2010. The rapid growth in Lehi is due, in part, to the rapid development of the tech industry region known as Silicon Slopes. The center of population of Utah is located in Lehi.